SpeedBox 3.0 for Yamaha (PW-X, SE, TE, X2) - Package: BOX, Qty: 1 pcs
PROPERTIES:
Activation: LIGHT button / ↑↓↑↓
Maximum speed: unlimited
Speed limit setting: yes
Display shows: actual values
Compatible with motors:
  PW-SE
  PW-X
  PW-TE
  PW-X2
  PW-ST until 2021 incl.
Not compatible with e-bikes and motors:
  Yamaha UrbanRush
  CrossCore
  CrossConnect
  Wabash
  PW-X3
  YDX-Torc
  YDX-Moro
  YDX-Moro Pro
  YPJ
  PW-ST since 2022
Not compatible with:
  SpeedBox App
In case of updating the software of your e-bike, uninstall SpeedBox from the e-bike first, update the software and reinstall SpeedBox.
More
Product code: SB3_Y_1pcs_BOX Shipping and Payment
A smart chip of the third generation with an option to set a speed limit of an e-bike.
SpeedBox 3.0 tuning chip enables to select speed limit of your own choice. After the chip is installed, your e-bike’s display will show real data, such as maximum and average speeds, daily mileage and cruising range.
How does SpeedBox 3.0 work?
The tuning kit can be activated directly on your bike’s display. After pressing the LIGHT button or ↑↓↑↓, a value of 99 km/h (62 mph) is displayed and from now on you will be able to ride at an unlimited speed.
To deactivate the tuning kit, press the LIGHT button or ↑↓↑↓ again. The value of 25 km/h (16 mph) will appear on your display and the speed limit will reset to 25 km/h. Your e-bike will then work the same as before installation of the chip.
If you want to control your SpeedBox and lights separately, use the combination of ↑↓↑↓ buttons. By pressing the arrows in that order you can activate and disactivate SpeedBox anytime independently of the lights control.
You can set the maximum speed of an electric assistance by changing modes by switching modes three levels down and then three levels up. An actual speed limit will be displayed after that. The maximum speed of an electric assistance can be switched by pressing LIGHT button shortly or by turning the rear wheel 360°. The last displayed limit will be saved after 5 seconds of inactivity.
Assembly
When connecting the SpeedBox chip to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.
If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 1 km before the chip is activated.
Detailed installation information can be found here
Warning
Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk. The use of SpeedBox may void the warranty of your ebike.
We strongly recommend using other safety features and protective gear to prevent injuries.
Bluetooth/ SpeedBox App | NO |
---|
Peter Wetzel
PositivesSUPER Abwicklung und einfache Handhabung, Danke
Negatives
Vincent Westrich
PositivesLe tuto vidéo et les images sur le site internet aide bien lors du montage
Negatives