SpeedBox 3.1 for Giant (RideControl Go) - Package: BOX, Qty: 100 pcs + 16 free

star 1 star 2 star 3 star 4 star 5(6)Rating value is 5 of 5
Specify product selection
Variant does not exist

$ 22600
In Stock
pcs

PROPERTIES:
Activation: WALK button/ - + - +
Maximum speed: unlimited
Speed limit setting: yes
Display shows: actual values
Only compatible with:
   RideControl Go
   SyncDrive Pro motor 2022
Not compatible with:
   Giant Revolt E+ (2022-2023)
   SpeedBox App
Not compatible with: softwares from 2023 onwards

We do not recommend updating the software of the e-bike

More

Product code: SB31_G_100+16pcs_BOX Shipping and Payment

Reliable third generation tuning chip for Giant e-bikes with 2022 Syncdrive Pro motor and RideControl Go

SpeedBox 3.1 tuning chip enables to suppress the speed limiter on your electric bike. After the chip is installed your e-bike’s display shows real data, such as maximum and average speed, daily mileage and cruising range.

How does SpeedBox 3.1 work?

The tuning kit can be activated directly on your bike’s controller.  After pressing the WALK button, a value of 9.9 km/h (6.2 mph) is displayed and from now on you will be able to ride at a speed of 40 km/h, 50 km/h and even more than 60 km/h.

To deactivate the tuning kit, press the WALK button again. The value of 2.5 km/h (1.6 mph) will appear on your display and the speed limit will reset to 25 km/h. Your e-bike will then work the same as before installation of the chip.

SpeedBox was also designed for e-bikes that do not have a classic control unit with Walk button. In this case you can just use the combination of - + - + buttons and SpeedBox will be activated. You can easily deactivate SpeedBox in the same way.

You can set the maximum speed of an electric assistance by switching modes three levels down and then three levels up. An actual speed limit will be displayed after that. The maximum speed of an electric assistance can be switched by pressing WALK button shortly or by turning the rear wheel 360°. The value of 1,5 km/h on the display corresponds with the limit of 15 km/h, 2 km/h corresponds with the limit of 20 km/h, 2,5 corresponds with 25 km/h, 3,0 corresponds with 30 km/h, 9,9 corresponds with 99 km/h etc. The last displayed limit will be saved after 5 seconds of inactivity.

Assembly

When connecting the SpeedBox chip to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.

If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 10 km before the chip is activated.

Detailed installation information can be found here.

Warning

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk. The use of SpeedBox may void the warranty of your ebike.

We strongly recommend using other safety features and protective gear to prevent injuries.

Bluetooth/ SpeedBox App NO
Motor from 2015/2016 NO